14 © June 2011 Icom America
To send PTT ID
Press PTT to send the tone. The TX PTT ID will flash continuously on the RX radio(s).
RX Radio:
Memory Ch
5Tone Signaling » Form
Set to DTMF
5Tone Signaling » RX C.No
Set to 1. Points to 1
line in the RX Code CH window: the
RX Code CH (under 5 Tone)
Line 1 » RX Code
Line 1= Enter in a “ ++++7” . The plus’s are place holders
which allows the RX radio to see any first 4 numbers TX’d
in 5-Tone mode. The “7” is the qualifier and tells the RX
radio to look at the 1
st
4 digits. All radios involved need the 7
RX Code Setting (under 5 Tone)
Compare Digit Sets which digits you want displayed on the RX radio
display. For example: In receiving ID 23787, if you want the
display too show the “378” part of the ID, enter in 234 (these
are the digit spaces you want displayed)
To Next Page
Loading...
