Icom IC-910H - Panel Description; Front Panel Controls - Basic Operations

2 © June 2011 Icom America
To Make a call
To call a specific radio (selective call):
1. Press the assigned TX Code CH Select key to enter the select mode.
2. Press the assigned TX Code Up key (or up/down keys) to scroll and select the target radio.
3. Press the assigned Call key. This sends the target radio’s 5-tone code.
RX Radio:
Memory Ch
Field
Setting / Description
5Tone Signaling » Form
Set to EIA
5Tone Signaling » RX C.No
Set to 1. Points to 1
st
line in the RX Code CH window: the
RX Radio’s ID.
RX Code CH (under 5 Tone)
Field Setting / Description
Line 1 » RX Code
This particular radio’s RX ID.