Icom IC-A23

34
12
OPERATION GUIDE
•
Transferring memory contents
"
MEMORY
q w e r t
Push [CLR] to select the frequency
mode or push [F], then push [ENT
(WX)] to select WX CH* mode.
Select the desired frequency or WX
CH*.
Push [F], then push [MR (MW)] to
enter memory programming mode.
• “M” blinks on the display.
Rotate [DIAL] to select a desired
memory CH number.
• Push [BANK], then select the
BANK number if desired. Push
[BANK] to exit the BANK selection
mode.
Push [ENT] to program the memory
contents.
q w e
Push [MR] to enter memory mode.
Select the desired channel to be
transferred.
Push [F], then push [MR].
• BANK number and menory CH
number disappears as frequency
mode is automatically selected
and the memory contents are
transferred.
"
SCAN (p. 14)
q w e
Push [CLR], [MR] or [F], then
[WX]* to select the frequency ,
memory or WX CH* mode.
Push [F], then push [SQL (SCAN)]
to start scanning.
• Decimal point blinks during scan-
ning.
• Rotate the [DIAL] to change the
scanning direction.
Push [CLR] to cancel the scanning.
"
TAG CHANNELS (p. 13)
q w
Push [MR] to select the memory
mode.
Push [F], then [9 (TAG)] to turn the
channel “TAG ” ON and OFF.
"
KEY LOCK FUNCTION (p. 8)
Push [F],Then push [7 (KELOCK)]
to turn the keylock function ON.
• “ ” appears on the display.
Push [F],Then push [7 (KELOCK)]
to turn the keylock function ON.
q w
•
Memory programming
*WX CH available U.S.A. version only.