9
2
PANEL DESCRIPTION
MONITOR, MONITOR (AUDIBLE)
± Push to turn the CTCSS (DTCS) or 2/5-tone squelch Mute ON
or OFF.
sOnly during LMR operation, push to open any squelch func-
tions, or deactivate any mute functions.
sOnly during PMR operation, push to activate one or two of the
following functions* on each channel.
- Push and hold to un-mute the channel (Audible mode).
- Push to mute the channel (Inaudible mode).
- Push to send a ‘reset code’ after the communication is finished.
*Ask your dealer for details.
./4% The un-mute condition may automatically return to
the mute condition, after a specified time period.
±
Depending on the presetting, pushing and holding this key for
1 sec. cancels a scan.
LOCK
Push and hold to electronically lock all programmable keys except
[Moni(Audi)], [Call] (including Call A and Call B), [Emergency],
[Surveillance] and [Lone Worker].
LONE WORKER (p. 22)
± Push to turn the Lone Worker function OFF.
± Push and hold to turn the Lone Worker function ON.
s7HENTHE,ONE7ORKERFUNCTIONISTURNED/.ANDNOOPERATIONIS
performed for the specified time period, the Emergency function is
automatically turned ON.
HIGH/LOW (p. 20)
Select the transmit output power level temporarily or permanently,
depending on the presetting.
s!SKYOURDEALERFORTHEOUTPUTPOWERLEVELFOREACHSELECTION
To Next Page
Loading...
Need help?
General
