Icom IC-F3000 Series - LED Indicator Status and Functions

7
2
PANEL DESCRIPTION
N LED indicator
The LED indicator indicates the status of various
parameters of the transceiver as follows;
(Ref.; R=Red, G=Green, O=Orange)
R* R*
TX Low BATT2
R* R* R* R*
O
O O
G G G G
G G
G G G G G G G G
R G R G R G R G R G R G R G R G
R O R O R O R O R O R O R O R O
G
G G
Clone Err
Clone TX/RX
Low BATT1
Low BATT2
Busy
F/S Scan
Call LED Blink
Call LED ON
TX Low BATT1
R*
TX
s48,IGHTS2EDWHILETRANSMITTINGASIGNAL
s28,IGHTS'REENWHILERECEIVINGASIGNAL
s#ALL,%$/.4URNS/.WHILERECEIVINGAMATCHEDTONE
s#ALL,%$"LINK"LINKSWHILERECEIVINGAMATCHEDTONE
s&AST3LOWSCAN"LINKSWHENTHE&AST3LOWSCANISACTIVATED
s,OW"ATTERY9OUSHOULDCHARGETHEBATTERYBLINKSSLOWLY
s,OW"ATTERY9OUMUSTCHARGETHEBATTERYBLINKSFAST
s48LOW"ATTERY6ERY,OW"ATTERYWASDETECTEDDURING48MODE
s#HANNEL%RROR!NONPROGRAMMEDCHANNELISSELECTED
* Lights (or blinks) orange when the optional battery case is attached.
s48LOW"ATTERY,OW"ATTERYWASDETECTEDDURING48MODE