21
3
BASIC OPERATION
N%MERGENCY#ALL
When [Emergency] is pushed for the specified time period*, the
emergency signal is transmitted once, or repeatedly, on the speci-
fied emergency channel.
A repeat emergency signal is automatically transmitted until the
transceiver receives an acknowledgement signal, or you turn the
transceiver power OFF.
When no emergency channel is specified, the signal is transmitted
on the previously selected channel.
If you want to cancel the emergency call, push and hold [Emer-
gency] again before transmitting the call.
If your transceiver is programmed for Silent operation, you can
transmit an Emergency call without the beep sounding and the LED
indicator lighting.
)-0/24!.4 It is recommended to set an emergency channel
individually to provide the certain emergency call operation.
D NOTES
Depending on the presetting, the following functions are automati-
cally activated. Ask your dealer for details.
s!UTO48FUNCTION
After the emergency call transmission, audio from the microphone
is automatically transmitted for a specified time period.*
s!UTO28FUNCTION
After the emergency call transmission, the transceiver stands by in
the audible mode for the specified time period.*
* Depending on the presetting. Ask your dealer for details.
To Next Page
Loading...
Need help?
General
