Icom IC-F3000 Series - Setting the Microphone Gain

N3ETTINGTHEMICROPHONEGAIN
Adjusts the microphone gain.
q Rotate [VOL] to turn the trans-
ceiver power OFF.
w3ET ;2/4!29 3%,%#4/2= TO
any channel other than Chan-
nel 16.
e While pushing and holding
[Lower], rotate [VOL] to turn the
power ON and enter the micro-
phone gain adjustment mode.
r Push [Upper] to increase, or
push [Lower] to decrease the
microphone gain.
 s4HEADJUSTABLERANGEISMINI-
mum) to 4 (maximum).
 s! BEEP SOUNDS AFTER PUSHING
[Upper] or [Lower].
If the level is set on 1 or 4, an
error beep sounds after push-
ing.
Therefore, you can determine the current level setting by the type
of beep that sounds.
t Rotate [VOL] to turn the power OFF, then ON to exit the micro-
phone gain adjustment mode.
./4%
s4HISOPERATIONMAYNOTBEAVAILABLEDEPENDINGONTHEPRESET-
ting. Ask your dealer for details.
s7HENUSINGTHE6/8FUNCTIONWERECOMMENDSETTINGTHEMI-
crophone gain to 3. However, you can adjust it to suit your op-
erating environment (including your headset performance).
18
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
[VOL]
[Upper]
[Lower]
[ROTARY SELECTOR]