Icom IC-F3000 Series - Transmission Notes and Inhibit Functions

16
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
D4RANSMITTINGNOTES
s4RANSMITINHIBITFUNCTION
The transceiver has several inhibit functions, which restrict trans-
MISSIONUNDERTHEFOLLOWINGCONDITIONS
- The channel is muted.
(PMR operation only)
- The channel is busy.
- A signal with the un-matched (or matched) CTCSS (or DTCS) tone
is received.
- The selected channel is a ‘receive only’ channel.
s4IMEOUTTIMER
After continuously transmitting longer than the pre-programmed time
period, the time-out timer activates, and stops further transmitting.
s0ENALTYTIMER
Once the time-out timer activates, transmitting is further inhibited for
a time period determined by the penalty timer.
s044)$CALL
The transceiver automatically sends the ID code (5-tone, DTMF,
BIIS or MDC system) when [PTT] is pushed (beginning of the trans-
mission) and/or released (end of transmission), depending on the
presetting.