Icom IC-F50V

20
3
BASICOPERATION
3
■ Emergency transmission
When[Emergency]ispushedforthespecifiedtimeperiod,an
emergency signal is automatically transmitted.
When[Emergency]ispushedforthespecifiedtimeperiod,the
DTMFor5-tone*emergencysignalistransmittedonceorrepeat-
edly on the emergency channel. However, when no emergency
channel is specified, the signal is transmitted on the previously
selected channel.
If you want to cancel the emergency call, push and hold the key
again before transmitting the call.
*Dependingontheoperatingmodeltype.
■ Scrambler function
The scrambler function provides private communication between
stations.
qPush[Scrambler]toturnthescramblerfunctionON.
 •“ ” appears.
wPush[Scrambler]againtoturnthescramblerfunctionOFF.
 •“ ” disappears.
■ Stun function
WhenthespeciedID,setasakillkey,isreceived,thestunfunc-
tion is activated.
WhenthekillIDisreceived,thetransceiverswitchestothepass-
word required condition. Entering of the password via the keypad
is necessary to operate the transceiver again in this case.