Icom IC-F50V - D Tx Code Channel Selection

17
3
BASICOPERATION
D TX code channel selection
Ifthetransceiverhas[TXCodeCHSelect]assignedtoit,thein-
dication can be toggled between the operating channel number
(orname)andTXcodechannelnumber(orname).Whenthe
TXcodechannelnumber(orname)isdisplayed,[CHUp]or[CH
Down]selectstheTXcodechannel.
USING [TX CODE CH SELECT] KEY:
qPush[TXCodeCHSelect]—aTXcodechannelnumber(or
name)appears.
wPush [CHUp]or[CHDown]toselectthedesiredTXcode
channel.
eAfterselecting,push[TXCodeCHSelect]toset.
 •Returntothestand-bymode.
rPush[Call]totransmittheselectedTXcode.
USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY:
Ifthetransceiverhasa[TXCodeCHUp]or[TXCodeCHDown]
key assignment, the programmed TX code channel can be se-
lected directly when pushed.
D TX code number edit (PMRoperationonly)
Ifthetransceiverhas[TXCodeCHSelect]or[TXCodeEnter]as-
signed to it, TX code contents can be edited within the allowable
digits.
USING [TX CODE CH SELECT] KEY:
qPush[TXCodeCHSelect]toentertheTXcodechannelselec-
tion mode.
 •SelectthedesiredoperatingchannelbeforeenteringtheTXcode
channel selection mode if necessary.
wPush[TXCodeCHSelect]for1sec.toentertheTXcodeedit
mode.
 •Thedigittobeeditedblinks.