Icom IC-F50V

21
3
BASICOPERATION
■ Recording function(Dependsontheversion)
ThetransceiverhasarecordingfunctionthatrecordstheTX/RX
voicemessages.WhenthespeciedIDisreceived,theautomatic
recording function activates and records the voice message for a
specified time period.
Or,ifthetransceiverhas[Playback/Rec]assignedtoit,manual
recording is also available.
Themaximumrecordlengthis480sec.,andthenumberofre-
cordable messages depend on the record length. Ask your dealer
for details.
e.g.Whentherecordlengthis10sec.,48messagesarerecordable.
Automatic recording:
qWhenthespeciedIDisreceived,therecordingfunctionisau-
tomatically activated.
 •“ ” blinks.
wWhilepushingandholding[PTT],speakintothemicrophoneat
a normal voice level.
 •TheTXvoicemessageisrecorded.
eRelease[PTT]toreceive.
 •TheRXvoicemessageisrecorded.
r The recording operation automatically stops after the following:
the specified time has expired, the recording memory is full,
pushinganykeybut[PTT],ortransmittingasingletone.
 •“ ” stops blinking.
 •Pushing[Playback/Rec](ifassigned)alsostopsrecording.
Manual recording:
qPushandhold[Playback/Rec]for1sec.toactivatetherecord-
ing function.
 •“ ” blinks.
wWhilepushingandholding[PTT],speakintothemicrophoneat
a normal voice level.
 •TheTXvoicemessageisrecorded.