Icom IC-F50V

22
3
BASICOPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
eRelease[PTT]toreceive.
 •TheRXvoicemessageisrecorded.
rPush[Playback/Rec]againtostoprecording.
 •“ ” stops blinking.
 •Therecordingoperationautomaticallystopsafterthefollowing:the
recordingmemoryisfull,pushinganykeybut[PTT],ortransmit-
ting a single tone.
Playing back:
Therecordedvoicemessagesareplayedbackwith[Playback]or
[Playback/Rec].
•“ ” appears on the function display when the unplayed message is
in the recording memory.
➥Push[Playback]or[Playback/Rec]toplaybacktherecorded
message in sequence starting with the latest one.
 •Push[CHUp]or[CHDown]toselectthedesiredmessage.
 •Ashortbeepisemittedafterplayingbackeachmessage.
 •Alongbeepisemittedafterplayingbackallmessages.
 •Duringplaybackmode,“ ” appears when the unplayed message
is played back, or “
” disappears when the played message is
played back.
 •“
” disappears after playing back the unplayed message for the
specified time period.
 •Ifyoupush[PTT]whileplayingbackthemessage,thetransceiver
stops playing back, and then starts to transmit.
Deleting the message:
➥Whileplayingbackthemessage,pushandhold[Playback]or
[Playback/Rec]for1sec.todeletetheplayingbackmessage.
➥Whilepushingandholding[P0]and[CHUp],turnpowerONto
delete all messages in the recording memory.