Icom IC-F50V - Panel Description

12
2
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
COMPANDER KEY
Push to turn the compander function ON and OFF.
The compander function reduces noise components from the
transmitting audio to provide clearer communication.
USER SET MODE KEY
➥Push and hold to enter the User Set mode.
 •IntheUserSetmode,pushthiskeytoselectanitemthatisena-
bled by your dealer, and change the value or condition by pushing
[CHUp]or[CHDown].
➥Push and hold this key again to exit the User Set mode.
PLAYBACK KEY(p.22)
➥Push to playback the recorded messages in sequence, starting
with the latest one.
 •Ashortbeepisemittedafterplayingbackeachmessage.
 •Alongbeepisemittedafterplayingbackallmessages.
 •Anerrorbeepisemittedwhentherearenomessagesin the
memory.
➥Whileplayingbackthemessage,pushandholdfor1sec.to
delete the selected message.
PLAYBACK/REC KEY(pp.21,22)
➥Push to playback the recorded messages in sequence, starting
with the latest one.
 •Ashortbeepisemittedafterplayingbackeachmessage.
 •Alongbeepisemittedafterplayingbackallmessages.
 •“NO REC” is displayed when no message is in the memory.
➥Push and hold for 1 sec. to start recording. Push again to stop
recording.
➥Whileplayingbackthemessage,pushandholdfor1sec.to
delete the selected message.