Icom IC-F50V

11
2
PANEL DESCRIPTION
EMERGENCY KEYS
Push and hold to transmit the emergency call.
•Theemergency call transmitswithbeeps;thedisplay doesnot
change.
•Thetransceivercantransmittheemergencycallsilentlyorwiththe
displaychangesdependingonthepre-setting.Askyourdealerfor
details.
•Ifyouwanttocanceltheemergencycall,pushandholdthekey
again before transmitting the call.
•Theemergencycallistransmittedonetimeonlyorrepeatedlyuntil
receivingacontrolcode,dependingonthepre-setting.
TX CODE ENTER KEY (PMRoperationonly)
Push to enter the TX code edit mode. Then set the desired digit
using[CHUp]/[CHDown].(p.18)
TX CODE CHANNEL SELECT KEY
➥ Push to enter the TX code channel selection mode. Then select
thedesiredchannelusing[CHUp]/[CHDown].(p.17)
➥WhileintheTXcodechannelselectionmode,pushandholdfor
1 sec. to enter the TX code edit mode. Then set the desired digit
using[CHUp]/[CHDown].(p.17;PMRoperationonly)
TX CODE CHANNEL UP/DOWN KEYS
Push to select a TX code channel directly.
ID-MR SELECT KEY(PMRoperationonly)
➥ Recalls detected ID codes.
 •Pushthiskey,thenpush[CHUp]/[CHDown]forselection.
 •Upto5ID’sarememorized.
➥ Push and hold to erase the selected memorized ID’s.
VOICE SCRAMBLER FUNCTION
Push to turn the voice scrambler function ON and OFF.