Icom IC-F50V - Page 47

40
8
OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
VOX gain and delay adjustment
NOTE: To adjust the VOX gain and VOX delay, these items
must be preset to “enable” by your dealer.
qAttachtheconnectoroftheVS-1SCintothe[SP/MIC]connec-
tor on the transceiver and tighten the screw.
 •Togglethetoggleswitchto[VOX].
wPushandhold[UserSetMode]for1sec.toentertheUserSet
mode.
ePush[UserSetMode]severaltimestoselect“VOXGain”or
“VOXDelay.”Then,push[CHUp]or[CHDown]tosetthede-
siredlevel/condition.
r
Pushandhold[UserSetMode]for1sec.toexittheUserSetmode.
• VOX Gain
TheVOXsensitivitylevelcanbeadjustedfromOFF,or1through6
for greater sensitivity.
VOX gain level is 3 (default)
• VOX Delay
TheVOXdelaytimecanbesetfrom0.5to3.0sec.(in0.5sec.
steps)tosettheintervalbeforereturningtoreceive.
VOX delay timer is 0.5 sec. (default)
NOTE: MIC/VOXgaincanbeadjustedbytheadjustingpot
using a thin screw driver.