4
PANEL DESCRIPTION
3
■
Front, top and side panels
q ANTENNA CONNECTOR (p. 2)
Connect the supplied antenna here.
w
DC JACK [DC] (p. 23)
Connect the charger or optional cable here.
NOTE: Attach the [DC] jack cap when the charger or op-
tional cable is not connected. Otherwise, water will get into
the transceiver. When attaching the [DC] jack cap, make
sure dust or other material does not adhere to the rubber
seal. If dust or other material is on the seal when attaching
the cap, waterproof protection may not be guaranteed.
e PTT SWITCH [PTT]
Hold down to transmit; release to receive. (p. 11)
r CHANNEL 16 KEY [16 9]
➥ Push to select Channel 16. (p. 8)
➥
Hold down for 1 second to select the Call channel. (p. 8)
➥
When the Call channel is selected, hold down for 3 seconds
to enter the Call channel programming mode. (p. 12)
➥ While in the Set mode, push to return to the normal op-
erating mode. (p. 17)
Function
display
(pp. 6, 7)
Speaker
y
t
r
e
u
w
q
!1
o
i
!0
Microphone
BP-266
BP-266
BP-266
q To remove the
[DC]
jack cap, rotate it
counter clockwise.
w Pull the cap up to detach it.
To Next Page
Loading...
