11
4
BASIC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Selecting a D Weather channel
(For Only U.S.A. and Australian version transceivers)
The transceiver has 10 weather channels. These are used for
monitoring broadcasts from NOAA. (National Oceanographic
and Atmospheric Administration)
The transceiver can automatically detect a weather alert tone
on the selected weather channel, or while scanning. (p. 16)
Push [CH/WX] once or twice to select a weather channel. q
•“WX”isdisplayedwhenaweatherchannelisselected.
•“WX ” is displayed when the Weather Alert function is ON. (p.
71)
Push [ w ∫]/[√] to select a channel.
•Pushing[Y]/[Z] on the microphone also select a channel.
When weather alert is OFF.
When weather alert is ON.
Adjusting the ■ volume and
squelch levels
The volume and squelch levels can be adjusted with [VOL/
SQL](Dial).
Push [VOL/SQL](Dial) one or more times to display the q
volume or squelch adjustment screen.
Rotate [VOL/SQL](Dial) w or push [∫]/[√]/[Ω]/[≈] to adjust
the volume or squelch level.
•Thetransceiverhas20volumelevelsandOFF.
•The transceiver has 11 squelch levels. OPEN is completely
open, 10 is tight squelch, 1 is loose squelch.
•Ifnokeyispushforabout5seconds,thetransceiversetsthe
selected volume level, and returns to the normal mode.
Push [ENT] to set the level, and exit the volume adjust- e
ment mode.
•Push[CLEAR]tocancel.
The desired function can be assigned to Dial. See page 72
for details.
To Next Page
Loading...
Need help?
General
