6
SET MODE
15
■ Set mode items
Scan mode
The scan mode can be selected as a normal scan or priority
scan. (p. 12)
Scan resume timer
The scan resume timer can be selected as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses until
the signal disappears. When ON is selected, the scan pauses 5
sec. and resumes even if a signal is being received on chan-
nels except for Channel 16.
Dualwatch/tri-watch
This item can be selected as dualwatch or tri-watch. (p. 10)
Beep tone
You can select silent operation by turning beep tones OFF, or
you can have confirmation beeps sound at the push of a
switch by turning beep tones ON.
LCD contrast
This item adjusts the contrast of
the LCD in 4 steps.
To Next Page
Loading...
