PANEL DESCRIPTION
3
2
■ Function display
q TRANSMIT INDICATOR (p. 8)
“TX” appears while transmitting.
w BUSY INDICATOR (p. 8)
“BUSY” appears when receiving a signal or when the
squelch opens.
e TAG CHANNEL INDICATOR (p. 13)
Appears when a tag channel is selected.
r CALL CHANNEL INDICATOR
“CALL” appears when the call channel is selected. (p. 6)
t LOW POWER INDICATOR (p. 8)
“LOW” appears when low power is selected.
y ATIS INDICATOR
➥ “ATIS” appears when the ATIS encoder is activated.
•The ATIS encoder is available for Germany and Holland ver-
sions only.
u DUPLEX INDICATOR (p. 7)
Appears when a duplex channel is selected.
i CHANNEL NAME INDICATOR
➥ Memory channel name appears if programmed. (p. 9)
➥ “” scrolls when the battery voltage drops to
approx. 10 V DC or below.
➥ “” appears during dualwatch; “” appears during tri-
watch. (p. 10)
o CHANNEL GROUP INDICATOR (p. 7)
Indicates whether an International (I) or U.S.A (U) channel
is selected.
• USA channel group is available for U.K. and Italy versions only.
!0 CHANNEL NUMBER READOUT
➥ Indicates the selected operating channel number.
• “A” appears when a simplex channel is selected. (p. 7)
➥ In set mode, indicates the selected condition. (p. 15)
To Next Page
Loading...
