Icom IC-M401EURO - Specifications and Options; I Specifications; I Options

24
10
SPECIFICATIONS AND OPTIONS
■ Specifications
• GENERAL
• Frequency coverage :
Transmit 156.025–157.425 MHz
(156.00–161.450MHz)*
Receive 156.025–162.025 MHz
(156.00–163.425MHz)*
* Frequency range that may be subject to licensing conditions.
• Mode : FM (16K0G3E)/DSC (16K0G2B)
• Channel spacing : 25 kHz
• Current drain (at 13.8 V) : TX high 6.0 A max.
Max. audio 1.2 A max.
• Power supply requirement : 13.8 V DC
• Frequency stability : ±1.5 kHz (–20°C to +60°C)
•Dimensions : 153(W) × 67(H) × 141.6(D) mm
(Projection not included)
• Weight : 900 g
• TRANSMITTER
• Output power : 25 W and 1 W
• Modulation system : Variable reactance phase modulation
• Max. frequency deviation : ±5.0 kHz
• Spurious emissions : Less than 0.25 µW
• RECEIVER
• Receive system : Double conversion superheterodyne
• Sensitivity (20 dB SINAD) : Less than –2 dBµ EMF (typical)
• Squelch sensitivity : Less than 0 dBµ EMF
• Intermodulation rejection ratio : More than 68 dB
• Spurious response rejection ratio : More than 70 dB
• Adjacent channel selectivity : More than 70 dB
• Audio output power : 2 W at 10% distortion with a 4 Ω load
■ Options
• DS-100 (#02) DSC CONTROLLER
When the DS-100 (#02) is installed, the transceiver conforms to DSC
class D for marine digital communications.
• MB-69 FLUSH MOUNT
For mounting the transceiver to a panel.
• SP-5 EXTERNAL SPEAKER
A large, external speaker for superior audio output.
• SP-10 EXTERNAL SPEAKER
A compact, external speaker for easy installation.
All stated specifications are subject to change without notice or
obligation.
0 IC-M401EURO_ (2).qxd 01.12.10 11:16 AM Page 24 (1,1)