PANEL DESCRIPTION
4
2
■ Microphone
q PTT SWITCH [PTT]
Push and hold to transmit; release to receive. (p. 8)
w CHANNEL UP/DOWN SWITCHES [
YY
]/[
ZZ
]
Push either switch to change the operating memory chan-
nel, set mode contents, etc.
e CHANNEL 16/CALL CHANNEL SWITCH [16/C]
➥ Same as the [16] switch on the front panel. (p. 2)
➥ Selects Channel 16 when pushed. (p. 6)
➥ Selects call channel when pushed for 1 sec. (p. 6)
•“CALL” appears when call channel is selected.
➥ Push for 3 sec. to enter call channel programming con-
dition when call channel is selected. (p. 9)
➥ While pushing [H/L], enters memory name programming
condition. (p. 9)
• Microphone lock function
The microphone lock function electrically locks the [Y]/[Z]
and [16/C] switches on the microphone. This prevents acci-
dental channel changes and accidental function access.
➥ While pushing [16] on the microphone, turn power ON to
toggle the microphone lock function ON and OFF.
To Next Page
Loading...
