54
7
DSC OPERATION
■ Making DSC calls
D Making a Polling Request Reply call (continued)
Manual Reply:
q Enter “POLLING REPLY” in the DSC CALLS menu.
MENU ➪ DSC Calls ➪ Polling Reply
(Push [MENU].)
(Rotate Dial, then push [ENT].)
• If no Polling Request call is received, the Polling Reply item will
not be displayed.
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
w Select a desired Polling Request call to be replied, using
Dial or [Y]/[Z], then push Dial or [ENT].
e The Polling Request Reply call confirmation screen is dis-
played. Push [CALL] to make an acknowledgement call.
r While transmitting the reply call, the screen shown below is
displayed, and then returns to the normal operating mode.
To Next Page
Loading...
