60
7
DSC OPERATION
Receiving DSC calls (Continued)
D Receiving a Position Report Call
When a Position Report Call is received:
The alarm sounds for 2 minutes.
“RCVD POSITION REPORT” is displayed. The backlight
blinks for 2 minutes.
q Push [ALARM OFF] to stop the alarm and the blinking
backlight.
• Even if you do not push [ALARM OFF], the alarm stops after 2
minutes, and then the screen in step w is displayed.
w Push a softkey to select your desired action.
[EXIT]
Push to ignore the Call and return to the normal operat-
ing mode.
• The transceiver exits the DSC mode.
• “ ” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call information. (p. 63)
To Next Page
Loading...
