Need help?Do you have a question about the Icom IC-M600 and is the answer not in the manual?
General| Operating Temperature Range | -15°C to +55°C |
|---|---|
| Antenna Impedance | 50 Ω |
| Modulation System | Phase modulation |
| Frequency Tolerance | ±10 ppm |
| Adjacent Channel Power | More than 70 dB |
| Squelch Sensitivity | 0.25 μV |
| Intermodulation Rejection Ratio | More than 70 dB |
| Spurious Response Rejection Ratio | More than 70 dB |
| Channels | 249 |
| Weight | 6.8 kg |
| Modulation | Phase modulation |
Important safety warnings and precautions for operating the transceiver.
Component identification and layout for the main circuit board of the transceiver.
Detailed description of the receiver's RF filtering and signal processing stages.
Detailed description of the transmitter's microphone, modulator, and mixer stages.
Procedure for adjusting the Phase Locked Loop circuits for accurate frequency generation.
Procedures for adjusting receiver gain, mixer balance, total gain, and S-indicator.
Procedures for adjusting transmitter idling current, IC APC, SWR detector, and transmit gain.
Procedure for adjusting the output power across various frequency bands and modes.
To Next Page
