Icom IC-M85

3-2
2. REMOVING THE MAIN UNIT
Disconnect the flat cable and remove dial nut from 1)
the MAIN UNIT.
J404J404
Dial nut
FLAT CABLE
Lift up
flat cable
Flat cable
Chassis
Remove with;
“ICOM Driver (AG)”
(8960000560)
Separate the MAIN UNIT from the chassis.2)
MAIN UNIT
Chassis
Screws ×10
3. REMOVING THE FRONT UNIT
Disconnect 2 flat and speaker cables from the 1)
FRONT UNIT.
J3
J4
J4
J5
J5
Front panel
FLAT CABLE
Lift up
flat cable
Speaker cable
Flat cable
Flat cable
Remove 2 screws, then separate the FRONT UNIT 2)
from the front panel.
FRONT UNIT
Screws ×2
Front panel