Icom IC-R5 - Section 3 Disassembly Instructions

SECTION 3 DISASSEMBLY INSTRUCTIONS
3 - 1
•
REMOVING THE REAR PANEL
1 Unscrew 2 screws, A
.
2 Remove the rear panel in the direction of the arrow.
•
REMOVING THE RF UNIT
1 Unscrew 1 screw, B
.
2 Unsolder 4 points, C.
3 Remove 1 knob, and 1 cap G.
Unscrew 2 nuts, E and F.
4 Unplug, H, to separate the LOGIC unit, and then remove
the RF unit.
•
REMOVING THE LOGIC UNIT
1 Unsolder 2 points, I.
2 Unscrew 2 screws, J, and then remove the LOGIC unit.
3 Remove the LOGIC unit in the direction of the arrow.
A
Rear panel
J
LOGIC unit
I
B
C
D
H
RF unit
E
G
F
LOGIC unit