OPTIONS
7
28
D Battery packs
In the output power and operating period columns, bracketed values
refer to the 440 (430) MHz band.
*
1
Operating periods are calibrated for the following conditions:
Tx : Rx : standby=1 : 1 : 8 min.
*
2
Operating period depends on alkaline cells used.
D Speaker-microphones
D Others
MB-30 MOUNTING BRACKET
For mounting the transceiver on the inside door panel of a vehicle or
on a wall.
LC-136/LC-137 CARRYING CASES
LC-136: for IC-T7H with BP-170/171/172.
LC-137: for IC-T7H with BP-173/180.
SP-13 EARPHONE
Provides clear receive audio in noisy environments.
CS-T7 CLONING SOFTWARE + OPC-478 CLONING CABLE
Provide quick and easy programming of memory channels and set
mode contents, etc. via a PC.
D Chargers and cables
BC-110A/D/V WALL CHARGER
Regularly charge battery packs attached to the transceiver in 15 to 20
hrs.
BC-119 DESKTOP CHARGER + AD-56 BATTERY PACK ADAPTER
Rapidly charge battery packs in 1 to 1.5 hrs. depending on the bat-
tery pack. An AC adapter is packed with the BC-119. The AD-56 must
be used with the BC-119 for charging the battery pack. The CP-17L
or OPC-515L can be used instead of the supplied AC adapter.
CP-12L CIGARETTE LIGHTER CABLE WITH NOISE FILTER
For operation and charging via a 12 V cigarette lighter socket.
OPC-254L DC POWER CABLE
For operation and charging via an external power supply.
HM-46
HM-75A
HM-54
HS-85
HEADSET
¥ PTT switch
¥ VOX
¥ One-touch PTT for
hands-free operation
Remote control
capability (see p. 23 for details)
BATTERY HEIGHT
VOLTAGE CAPACITY
OUTPUT OPER.
PACK (mm/in) POWER PERIOD*
1
BP-170 63.5/2.5
Battery case for
2.0 (1.5) W
20 (19) h*
2
LR6 (AA) × 4 alkaline cells
BP-171 63.5/2.5 4.8 V 700 mAh
2.0 (1.5) W
6.2 (5.5) h
BP-172 63.5/2.5 4.8 V 950 mAh
2.0 (1.5) W
8.3 (7.5) h
BP-173 75.5/3.0 9.6 V 650 mAh
5.0 (4.5) W
4.3 (4.2) h
BP-180 75.5/2.5 7.2 V 600 mAh
3.9 (2.8) W
4.2 (4.2) h
IC-T7H-2.qxd 2007.07.19 4:10 PM Page 28
To Next Page
Loading...
