Need help?Do you have a question about the Icom IC-V100 and is the answer not in the manual?
General| Frequency Range | 136-174 MHz |
|---|---|
| Mode | FM |
| Channel Capacity | 200 channels |
| Dimensions | 58 x 112 x 30 mm (w/o projections) |
| Weight | 270g with BP-298 |
| RF Power Output | 5W |
| Channel Spacing | 12.5/25 kHz |
Lists all items included in the transceiver package, such as mounting hardware, cables, and the microphone.
Instructions for physically mounting the transceiver unit within a vehicle, including bracket placement and screw usage.
Details on the required DC voltage, current, and grounding for operating the transceiver, including cautions for incorrect voltage.
Identification and description of all buttons, switches, and knobs on the front of the transceiver unit.
Explanation of the various indicators and symbols displayed on the transceiver's screen during operation.
Description of the ports and connectors located on the rear of the transceiver for antenna, speaker, and power.
Steps for setting up and operating the transceiver to receive radio signals, including squelch adjustment.
Instructions on how to transmit radio signals using the push-to-talk switch and microphone.
Method for changing between different operating channels using the up/down switches.
Explanation of how to use the scanning functions (Priority Scan, Step Scan) to monitor multiple channels.
Procedure for setting a specific channel as the priority channel for scanning.
Steps to program channels to be excluded (locked out) from the scanning sequence.
Description of the monitor function, allowing listening to busy channels with tone squelch active.
To Next Page
