Need help?Do you have a question about the Icom IC-V86 and is the answer not in the manual?
General| Frequency Range | 136-174 MHz |
|---|---|
| Output Power | 7 W |
| Waterproof Rating | IP54 |
| Mode | FM |
| Channel Spacing | 12.5/25 kHz |
| Antenna Impedance | 50Ω |
| Modulation System | Variable reactance frequency modulation |
| Spurious Response | 70 dB |
| Maximum Frequency Deviation | ±5 kHz |
| Spurious Emissions | -60 dB |
| Audio Distortion | Less than 10% (at rated audio output) |
| Battery Life | Up to 19 hours (BP-298) |
| Dimensions | 58 x 112 x 30 mm; 2.3 x 4.4 x 1.2 in (W x H x D, Projections not included) |
Procedures for attaching, removing, and handling battery packs or cases.
Instructions for rapid charging the BP-264 battery pack using the BC-191 charger.
Instructions for regular charging the BP-264 battery pack using the BC-192 charger.
Procedure for rapid charging BP-298/BP-299 Li-ion packs with the BC-240 charger.
How to set the audio volume and adjust the squelch sensitivity for clear reception.
Guidance on receiving signals and steps for transmitting, including PTT usage.
Steps to set frequencies, duplex, and tone for repeater communication.
How to use tone or DTCS codes to open the squelch for clear reception.
Methods for transmitting DTMF codes manually or from memory channels.
Accessing and customizing initial transceiver settings at power-on.
Procedure for clearing all programming and restoring factory default settings.
Diagnosing and resolving problems related to power and audio output.
Troubleshooting issues that prevent transmitting and VOX function errors.
To Next Page
