EasyManuals Logo

Icom IC-V86 User Manual

Icom IC-V86
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
5
MEMORY/CALL OPERATION
5-3
D Memory/Call to memory/Call
1. Push [VFO/MR/CALL] several times to select the
memory mode or Call channel mode.
For memory channel:
Push [Y] or [Z] to select the memory channel
to copy.
2. Push [FUNC], and then push [VFO/MR/CALL].
X” and “--” blink.
L Do not hold down [VFO/MR/CALL] for more
than 1 second, otherwise the memory contents
will be copied to the VFO mode.
3. Push [Y] or [Z] to select the target memory or
Call channel.
L To cancel programming, push [VFO/MR/CALL]
before doing step 3.
4. Push [FUNC], and then hold down [VFO/MR/
CALL] for 1 second to copy the contents of
selected memory, or the Call channel, to the
target memory.
Example: Copying memory channel 11 contents to
channel 12.
Push or to select channel 11.
Push , and then push .
(Memory mode)
Push or to select channel 12.
Push , and then hold down for 1 second.
Copying memory/Call contents

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-V86 and is the answer not in the manual?

Icom IC-V86 Specifications

General IconGeneral
Frequency Range136-174 MHz
Output Power7 W
Waterproof RatingIP54
ModeFM
Channel Spacing12.5/25 kHz
Antenna Impedance50Ω
Modulation SystemVariable reactance frequency modulation
Spurious Response70 dB
Maximum Frequency Deviation±5 kHz
Spurious Emissions-60 dB
Audio DistortionLess than 10% (at rated audio output)
Battery LifeUp to 19 hours (BP-298)
Dimensions58 x 112 x 30 mm; 2.3 x 4.4 x 1.2 in (W x H x D, Projections not included)

Related product manuals