Icom ID-800H

5 - 7
SOFTWARE ADJUSTMENT (continued)
ADJUSTMENT
ITEM
ADJUSTMENT CONDITION DISPLAY OPERATION
SENSITIVITY
[Tr]
11 • Operating freq. : 480.100 MHz
• Receiving
• Push [BAND].
12 • Operating freq. : 549.900 MHz
• Receiving
• Push [BAND].
13 • Operating freq. : 810.100 MHz
• Receiving
• Push [BAND].
14 • Operating freq. : 905.100 MHz
• Receiving
• Push [BAND].
15 • Operating freq. : 999.900 MHz
• Receiving
• Push [BAND].
S-METER [SL]
(Wide)
1
• Operating freq. : 145.100 MHz
• Connect an SSG to the antenna
connector and set as ;
Level : 1 µV* (–107 dBm)
Modulation : 1 kHz
Deviation : 3.5 kHz
• Receiving
• Push [BAND].
2
• Operating freq. : 435.100 MHz
• Receiving
• Push [BAND].
3
• Operating freq. : 445.100 MHz
• Receiving
• Push [BAND].
4
• Operating freq. : 810.100 MHz
• Set an SSG as:
Level : 5.6 µV* (–92 dBm)
• Receiving
• Push [BAND].
SQUELCH
[Sq] (Wide)
1
• Operating freq. : 145.120 MHz [EXP]
146.100 MHz [USA]
• Connect an SSG to the antenna
connector and set as :
Level : 0.079 µV* (–129 dBm)
Modulation : 1 kHz
Deviation : 3.5 kHz
• Receiving
• Push [BAND].
2
• Operating freq. : 435.100 MHz [EXP]
445.100 MHz [USA]
• Receiving
• Push [BAND].
3
• Operating freq. : 445.100 MHz [EXP]
435.100 MHz [USA]
• Set an SSG as:
Level : 0.1 µV* (–127 dBm)
• Receiving
• Push [BAND].
4
• Operating freq. : 810.100 MHz
• Set an SSG as:
Level :
0.2 µV* (–121 dBm) [EXP]
0.25 µV* (–119 dBm) [USA]
• Receiving
• Push [BAND].
*This output level of a standard signal generator (SSG) is indicated as SSG’s open circuit.