5
OPTIONAL PRODUCTS
5-17
■ Connecting and disconnecting (continued)
Selecting the device to connect from the pairing list.
1. Turn ON the Bluetooth function. (p. 5-12)
2. Push [FUNC] to select “Pairing List.”
3. Push [▲]/[▼] to select a Bluetooth device to connect.
4. Push [Call history].
• After few seconds, a beep sounds and the Bluetooth connection
between the IP501H and the selected device is established.
5. Push [CLR/LOCK].
• Exits the Set mode.
[FUNC]キー
[▲]/[▼]キー
[CLR/LOCK]キー
[履歴]キー
ICOM BT-000:00-00
Unconnected
Pairing List
ICOM BT-000:00-00
Connected
The " ” icon appears
[Call history]
[FUNC]
[CLR/LOCK]
[▲]/[▼]
To Next Page
Loading...
