What does 'Pairing list is full' mean on my Icom Radio?
If “Paring list is full” is displayed in the Pairing screen on your Icom Radio, the number of paired devices exceeds the maximum number. Delete a Bluetooth device from the pairing list.
Why no sound from earphone connected to VS-3 with Icom Radio?
If no sound comes from the earphone connected to the VS-3 with your Icom Radio, the VS-3's volume level may be set too low. Increase the VS-3's volume level. You can also increase the IP501H's volume level if "Bluetooth Synchronous Volume" is set to valid.
Why does deleted audio still exist on Icom IP501H?
If the deleted recorded audio still exists on your Icom Radio, the battery pack may have been removed before the recorded audio was fully deleted from memory. Remove the battery pack after “Power OFF…” is displayed.
Instructions on how to attach the antenna to the transceiver.
Instructions on how to attach the hand strap to the transceiver.
Instructions on how to attach the belt clip to the transceiver.
Instructions on how to attach the battery pack to the transceiver.
Steps to power on the device and adjust the audio output level.
Explains the layout and components of the transceiver's panel.
Explains the meaning of various icons and indicators displayed on the screen.
Details the functions and operations of the transceiver's various keys.
Describes the warning beeps that sound when the battery status is nearly exhausted.
Explains how to enable and disable the key lock feature to prevent accidental access.
How to transmit audio and receive calls on the transceiver.
Guide on how to use the address book for initiating calls.
Instructions on accessing and managing call history logs.
How to send messages to other parties using the device.
Steps to view incoming messages on the device.
How to initiate a status call to another party.
Explanation of how to use group or talkgroup communication.
How to select a talkgroup using the FUNC key.
How to select a talkgroup using the Address key.
Details the various functions that can be assigned to the Option key.
Instructions on enabling and using the call recording feature.
How the pocket beep notification works when a call is received.
How the P-Bell notification function operates when a call is received.
How the Voice Operated Exchange (VOX) function works for hands-free operation.
How to transmit and receive emergency calls.
Explanation of the Lone Worker safety feature.
Explanation of the Man Down safety feature.
Steps to enter the basic configuration mode on the transceiver.
Steps to enter the advanced configuration mode on the transceiver.
How to navigate and change settings within Set Mode.
A comprehensive list of configurable settings and their options.
Catalog of available accessories for the IP501H transceiver.
Information on battery charging duration and operating time.
Safety warnings and precautions for handling battery packs.
Instructions for charging the battery using the BC-202IP2 charger.
Instructions for charging the battery using the BC-211 charger.
Instructions for charging the battery using the BC-218 charger.
How to insert the transceiver into the BC-218 for charging.
How to use the transceiver's Bluetooth capabilities.
Details of the HM-215 microphone and BC-218 charger.
Instructions for charging the VS-3 Bluetooth headset.
Steps to pair the transceiver with Bluetooth devices.
How to establish and terminate Bluetooth connections.
How to remove paired Bluetooth devices from the list.
How to reset the Bluetooth pairing list.
Instructions for installing the mounting accessories.
Information on the LC-185 carrying case.
General guidelines for connecting external devices.
Common problems and their solutions for the transceiver.
Technical specifications of the IP501H transceiver and accessories.
To Next Page
General
