Icom MA-510TR - Transponder Display Details; Function Display Icons

3
2
PANEL DESCRIPTION
1TX OFF INDICATOR
Displayed when the TX function is OFF.
(p. 21)
NOTE: When one of the following
messages is displayed on the Function
display, push [CLR] to clear it.
• “Priority interrupted last attempts.”
is displayed when the transponder
cannot make a periodic transmission
because the transponder detects a
transmit signal.
• “Coast Station inhibiting AIS TX. XX
min” is displayed when transmission
is inhibited by a coast station for the
displayed period of time.
L The transmission inhibit period of
time is displayed instead of “XX.”
This indicator is displayed while
transmission is inhibited.
2GPS ICON
• Displayed when GPS data is received.
• Blinks while searching GPS data.
(p. 9)
3NAVIGATION ICON
Displayed during navigation. (p. 28)
L is displayed while in the MOB
mode. (p. 27)
4CPA/TCPA ICON
Displayed while the CPA/TPA alarm
sounds.
5MESSAGE ICON
Displayed when there is an unread
message. (p. 23)
6LOW BATTERY ICON
Displayed when the battery voltage
drops to 9 V for 1 second.
L The icon disappears when the battery
voltage returns to 10 V.
7MMSI
Displays the 9-digit MMSI code. (p. 4)
L If a code is not entered, “000000000” is
displayed.
■ Function display
Main screen (p. 11)
1 23456 7