23
6
OTHER FUNCTIONS
■ Message
D Receiving a message
A safety-related message of up to 161 characters can be received from an AIS equipped
vessel in the area.
1. When a message is received, a beep sounds, and a
popup screen is displayed.
• “Message is received. Read it now?” is displayed.
2. Select [OK], and then push [ENT] to display the
message.
• The “DETAILS” screen is displayed.
NOTE: The received messages are automatically saved
in your RX log. See below for details.
D Message logs
The transponder saves up to 20 received messages in your RX log.
The oldest message is automatically deleted when a new message is received.
On the Function display,
is displayed when there is an unread message.
1. Open the “RX log” screen.
[MENU] > AIS Information > AIS messages > RX log
• “No message” is displayed when there is no received
message.
•
is displayed when there is an unread message.
•
is displayed when there is no unread message.
2. Push [▲] or [▼] to select a message, and then push
[ENT] to display the detail message.
• The “DETAILS” screen is displayed.
To Next Page
Loading...
