43
8
CONNECTIONS AND INSTALLATION
■ Mounting the transponder
D Using the supplied mounting bracket
You can mount the transponder on a dashboard using the universal mounting bracket
supplied with your transponder.
CAUTION: KEEP the transponder at least 1 meter (3.3 ft) away from the vessel’s
magnetic navigation compass.
1. Mount the bracket securely to a surface which is more than 10 mm (0.39 in) thick and
can support more than 3 kg (6.6 lb) using the 4 supplied screws (5 × 20 mm).
NOTE:
using the user supplied bolts and nuts, as shown below.
2. Attach the transponder to the bracket so that the face of the transponder is at 90° to
your line of sight when operating it.
L Adjust the function display angle to be easy-to-read.
Mounting Example
To Next Page
Loading...
