Icom MA-510TR - Managing Friends and IDs; Setting a Friend; Deleting a Friend ID

18
5
BASIC OPERATION
5
7
10
15
18
8
13
11
16
9
14
6
12
17
1
4
2
3
■ Setting a Friend
You can set up to 100 AIS targets as a Friend in the Friends list.
An alarm sounds when a Friend is detected, depending on the setting. (p. 34)
D Entering an ID
There are 3 ways of setting a Friend, using the Friends list, selecting in the AIS list, or
selecting on the plotter display.
Using the Friends list:
1. Open the “Friends list” screen.
[MENU] > Friends > Friends list
• “No ID” is displayed when there is no Friend.
2. Push [ENT] to display the Menu window.
• The Menu window is displayed.
3. Select “Add” and push [ENT] to start the ID entry.
4. Select “Finish” and push [ENT] to enter the ID.
Selecting in the AIS list:
1. Open an AIS list screen.
[MENU] > AIS list > Target list/Danger list
2. Push [▲] or [▼] to select an AIS target.
3. Push [ENT] to display the Menu window.
• The Menu window is displayed.
4. Select “Register as a Friend,” and push [ENT].
• is displayed.
Selecting on the plotter display:
1. Push [◄] or [►] to select an AIS target.
• A target box is displayed around the selected target.
(p. 13)
2. Push [ENT] to display the Menu window.
• The Menu window is displayed.
3. Select “Register as a Friend,” and push [ENT].
• is displayed on the plotter display.
•
is displayed in the information box.
D Deleting an ID
1. Open the “Friends list” screen.
[MENU] > Friends > Friends list
2. Select an ID, and push [ENT] to display the Menu
window.
• The Menu window is displayed.
3. Select “Delete,” and push [ENT].
• “Delete friend ID. Are you sure?” is displayed.
4. Select “OK,” and push [ENT].