Icom MA-510TR - Other Functions: Navigation; Waypoint Management

24
6
OTHER FUNCTIONS
6
7
10
15
18
8
13
11
16
9
14
12
17
1
4
2
5
3
■ Waypoint
D Waypoint list
The transponder saves up to 100 waypoints in the waypoint list.
D Navigating to a waypoint
The transponder assists you to navigate to a selected waypoint in the Waypoint list.
L See “Navigation” on page 28 for details.
1. Open the “Waypoint” screen.
[MENU] > Navigation settings > Waypoint
2. Push [▲] or [▼] to select a waypoint.
L Push [◄] to sort the waypoint data by Name.
L Push [►] to sort the waypoint data by Range.
L A waypoint during navigation is located at the top of
the list, and
is displayed.
1. Open the “Waypoint” screen.
[MENU] > Navigation settings > Waypoint
2. Push [▲] or [▼] to select a waypoint.
L Push [◄] to sort the waypoint data by Name.
L Push [►] to sort the waypoint data by Range.
3. Push [ENT] to display the Menu window.
• The Menu window is displayed.
4. Select “Navigate to,” and then push [ENT].
• “Start navigation. Are you sure?” is displayed.
3. Push [ENT] to display the Menu window.
• The Menu window is displayed.
4. Select “Details,” and then push [ENT] to display the
detail screen.
• The “DETAILS” screen is displayed.
5. Select “OK,” and then push [ENT] to start navigation.
• The AIS and Highway screen is displayed, and the
transponder starts to navigate.