25
6
OTHER FUNCTIONS
D Entering a waypoint
The position information that you want to memorize can be added as a waypoint.
NOTE: You can also add your current position as a waypoint by pushing [WPT/MOB].
1. Open the “Waypoint” screen.
[MENU] > Navigation settings > Waypoint
2. Push [ENT] to display the Menu window.
• The Menu window is displayed.
3. Select “Add,” and then push [ENT] to add a waypoint.
• The “Name:” screen is displayed.
L If the waypoint memory is full, a popup screen is
displayed.
4. Enter a name.
TIP:
• Select a number, character, or space using [▲],
[▼], [◄], and [►].
• Push [ENT] to enter the selected number or character.
• Select “←” or “→” on the screen to move the cursor.
5. Repeat step 4 to enter the name of up to 15 characters.
6. Select [Finish], and then push [ENT] to set the name.
• The “LAT:” screen is displayed.
L If you enter no name, a popup screen is displayed,
and push any key to return the previous screen.
7. Enter a latitude.
L When GPS data is received, your current position
information is automatically displayed.
8. Select [Finish], and then push [ENT] to set the latitude.
• The “LON:” screen is displayed.
L If you enter the latitude out of range, a popup screen
is displayed, and push any key to return the previous
screen.
9. Enter a longitude.
L When GPS data is received, your current position
information is automatically displayed.
10. Select [Finish], and then push [ENT] to set the longitude.
• The waypoint is set, and the transponder returns to the
previous screen.
L If you enter the longitude out of range, a popup screen
is displayed, and push any key to return the previous
screen.
To Next Page
Loading...
