37
7
MENU ITEMS
Status log
Displays the type, date, and time of the last
25 malfunctions that were detected.
Alarm type Date Time
Description of the alarm type
Alarm type
Description
GPS
Displayed when “GPS
malfunction No GPS data” is
detected.
TX power
Displayed when “TX malfunction
No TX power” is detected.
TX
continuous
Displayed when “TX malfunction
Continuous TX” is detected.
ANT
VSWR 3
Displayed when “Antenna
malfunction High VSWR” is
detected.
ANT
VSWR 5
Displayed when “Antenna
malfunction Open or Short” is
detected.
RX
Displayed when “RX malfunction
No RCV” is detected.
RX noise
CH A
Displayed when “RX malfunction
CH A noise level” is detected.
RX noise
CH B
Displayed when “RX malfunction
CH B noise level” is detected.
Input
voltage
Displayed when the battery
voltage drops to 9 V for 1
second.
L is displayed.
TIP: You can delete the status log.
1. Push [▲] or [▼] to select a status
log.
2. Push [ENT] to display the Menu
window.
• The Menu window is displayed.
3. Select “Delete,” and push [ENT].
• “Delete status log. Are you sure?” is
displayed.
4. Select “OK,” and push [ENT].
D Radio information
Displays your transponder’s Serial number,
Software version, AIS engine version, and
GPS engine version.
To Next Page
Loading...
