Icom MR-1000TIII - Other Functions; Antenna Rotation Speed; Test Pattern Indication; Para-simulation Screen

10
31
OTHER FUNCTIONS
D Antenna rotation speed
The antenna rotation speed can be selected from 48
rpm and 36 rpm. (Default: 48 rpm)
Pushing and holding [–]/[ ] for 1 sec. to select 36
rpm rotation speed, pushing and holding [+]/[ ]
for 1 sec. to select 48 rpm rotation speed.
D Test pattern indication
To check the CRT indication distortion, a test pattern
can bee displayed.
While pushing and holding [MENU]/[ ], turn power
ON to display the test pattern.
To return to normal operating condition, turn power
OFF then ON again.
D Para-simulation screen
The MR-1000RII/TII/TIII has para-simulation screen
capability.
q While pushing and holding [BRILL]/[ ], turn
power ON.
w After the count down indication, stand-by screen ap-
pears.
e Push [TX (SAVE)]/[ ] to display the para-
simulation screen.
r To return to normal operating condition, turn power
OFF then ON again.
D All reset
q While pushing and holding [TARGET]/[ ], [EBL1
(VRM1)]/[ ] and [EBL2 (VRM2)]
/[ ], turn power ON.
w Follow the guidance.