Need help?Do you have a question about the Icom MR-1220 Series and is the answer not in the manual?
General| Peak Output Power | 4 kW |
|---|---|
| Antenna Rotation Speed | 24 rpm |
| Frequency | 9410 MHz ±30 MHz |
| Range Scales | 0.125, 0.25, 0.5, 0.75, 1.5, 3, 6, 12, 24 nm |
| Range Resolution | 25 m |
| Beam Width | 25° (vertical) |
| Power Supply | 12 V DC (10.8 - 15.6 V) |
Manual for ICOM MARINE RADAR MR-1220 series.
Crucial safety and operational instructions for the MR-1220 series.
Safety precautions for operating and handling the display unit.
Describes the layout and function of the front panel controls.
Details the function keys and their operations on the front panel.
Step-by-step instructions for powering the radar unit on and off.
Explains using fixed range rings and parallel index lines for distance measurement.
How to use EBL and VRM markers to measure target bearing and distance.
How to set up Guard zones for collision avoidance alarms.
Overview of ARPA for collision prevention and its features.
How to turn ARPA on/off, acquire targets, and understanding the ARPA display.
General guide on navigating the menu for customizing settings.
Explains basic wiring for power, NMEA, and system cables, and power source connection.
Instructions for mounting the display unit using brackets.
Steps for mounting the radome type scanner unit.
Mounting instructions for open array scanner units.
Tips for keeping the radar equipment clean and in good condition.
To Next Page
