Icom MR-1220 Series User Manual

9
2
BASIC OPERATION
Selecting a screen mode
The radar has 5 display modes.
L “(3D)” is displayed while in the 3D view mode.
z Push [MODE]/[ ] to select a display mode.
Mode Description Display
Head-up
• H-UP
• H-UP (3D)
The top of the display indicates your
heading.
Targets are shown at relative distances
and directions to your heading.
The headline always indicates the top.
North marker
Headline
Stabilized
Head-up
• SH-UP
• SH-UP (3D)
The top of the display indicates your
heading.
Targets are shown at relative distances
and directions to your heading.
The headline always indicates the top.
L Requires Bearing data input.
Course-up
• C-UP
• C-UP (3D)
The top of the display indicates the
heading when the mode has started or
when started transmitting.
L Requires Bearing data input.
North-up
• N-UP
• N-UP (3D)
The top of the display is xed to the
Magnetic north.
The targets are shown at their true
directions and relative distances to
your vessel.
L Requires Bearing data input.
True Motion
• TM
• TM (3D)
The top of the display is xed to
Magnetic north. The north marker is
xed to the top.
All the targets move with their true
courses and speed. The xed target
such as islands are displayed as xed.
L Requires Bearing and Position data
inputs.

Icom MR-1220 Series Specifications

General

Brand	Icom
Model	MR-1220 Series
Category	Marine Radar
Language	English