Need help?Do you have a question about the Icom MR-1000RII and is the answer not in the manual?
General| Output Power | 4 kW |
|---|---|
| Display Type | Color LCD |
| Range Scales | 0.125, 0.25, 0.5, 0.75, 24, 48 NM |
| Display Size | 10.4-inch LCD |
| Antenna Rotation Speed | 24 rpm |
| Operating Temperature | -15°C to +55°C |
| Antenna Length | 1.2 m (3.9 ft) |
Identifies and explains the function of buttons and controls on the radar's front panel.
Covers checking installation, powering the unit on/off, and initial scanning.
Guides on setting up alarm zones for collision avoidance.
Configures ATA parameters like target display, vectors, and alarms.
Describes selecting targets, viewing tracking data, and plot marks.
Details connecting display, scanner, power, and NMEA/data inputs.
Provides instructions for selecting a location and mounting the display unit.
Guides on selecting a location and mounting the EX-2714 and EX-2780 scanner units.
Explains how to connect the system cable to the scanner unit.
To Next Page
