Need help?Do you have a question about the Icom MR-1210RII and is the answer not in the manual?
General| Frequency Band | X-band |
|---|---|
| Output Power | 4 kW |
| Beamwidth (Vertical) | 25° |
| Frequency | 9410 MHz ±30 MHz |
| Antenna Rotation Speed | 24 rpm |
| Power Supply | 12/24 V DC |
| IP Rating (Antenna Unit) | IPX6 |
| Operating Temperature | +55°C |
Safety guidelines for handling, operating, and maintaining the display unit.
Safety guidelines for handling and operating the scanner unit.
Detailed description of buttons and controls on the radar's front panel.
Explanation of indicators, readouts, and icons displayed on the radar screen.
How to access and navigate through the radar's menu system.
Procedures for checking installation and turning the radar power on and off.
Methods for measuring distance using fixed rings, index lines, and range markers.
Configuring and activating alarm zones to detect approaching targets.
Explanation of the ATA function for target tracking and CPA/TCPA calculation.
Explanation of AIS system for vessel information exchange and collision risk management.
Wiring instructions for display, scanner, and NMEA ports.
Requirements for power source and proper ground connection.
Guidelines for selecting a location and mounting the display unit.
Location selection and mounting instructions for the EX-2714 radome scanner.
Detailed steps for wiring the system cable for the EX-2714 scanner unit.
Location selection and mounting instructions for the EX-2780 open array scanner.
Detailed steps for wiring the system cable for the EX-2780 scanner unit.
Instructions for attaching the antenna rotor to the scanner unit stay.
List of system errors and their conditions for troubleshooting.
List of error messages specific to the AIS unit.
Periodic checks and cleaning for reliable radar operation.
Cleaning and mounting checks for scanner and display units.
To Next Page
