Icom MR-1210RII - Resetting

58
10
OTHER FUNCTIONS
■ Resetting
The MR-1210 has two reset types. One is ‘Setting Re-
set’ and the other is ‘Factory Reset.’
‘Setting Reset’ resets all settings other than the set-
tings in the Initial menu.
‘Factory Reset’ resets all settings including the settings
in the Initial menu.
• Resetting is made on the Standby mode.
D Setting Reset
q Push [MENU]/[ ] to enter the Menu screen.
w Push [t] or [u] to select the Initial menu.
e Push [p] or [q] to select the “Setting Reset” item.
• The Reset items gray out if the TX mode is selected.
Push [TX (SAVE)]/[
] in this case.
r Push [ENTER]/[ ] to enter the option selection
mode.
• The confirmation “Sure?” is displayed.
t Push [ENTER]/[ ] to reset the settings.
y Push [MENU]/[ ] to exit the Menu screen.
D Factory Reset
q Push [MENU]/[ ] to enter the Menu screen.
w Push [t] or [u] to select the Initial menu.
e Push [p] or [q] to select the “Factory Reset” item.
• The Reset items are grayed out if the TX mode is se-
lected. Push [TX (SAVE)]/[
] in this case.
r Push [ENTER]/[ ] to enter the option selection
mode.
• The confirmation “Sure?” is displayed.
t Push [ENTER]/[ ] to reset the settings.
• After resetting, the display unit automatically restarts
and displays the Initial screen.
y Push [p] or [q] to select language.
• Selectable language differs, depending on the dis-
play unit’s version.
u Push [ENTER]/[ ] to display the Standby
screen.
(MENU > Initial > Setting Reset)
(MENU > Initial > Factory Reset)