Icom MR-1210RII

To Next Page

To Previous Page

SPECIFICATIONS

All stated speciﬁcations are subject to change without notice or obligation.

■ Options

• OPC-2339 SYSTEM CABLE (for only MR-1210RII)

Allows you to install the display unit and scanner up

to 20 m (65.6 ft) apart.

• OPC-2340 SYSTEM CABLE

Allows you to install the display unit and scanner up

to 30 m (98.4 ft) apart.

• UX-234 VIDEO OUTPUT UNIT

Allows you to connect an external display or a PC

monitor with a D-sub 15-pin connector (DE-15).

D EX-2780 (Open array)

 4 feet model

• Type: 120 cm (4 ft.) Slotted Waveguide Array

• Rotation speed (typical): 22 rpm (MR-1210TIII only), 24 rpm, 36 rpm

• Beam width (typical: Horizontal beam 2˚

Ver tical beam 23˚

• Side lobe (typical): –24 dB

• Polarization: Horizontal

• Transmission frequency: 9410 MHz ±30 MHz P0N

• Peak output power: 4 kW (MR-1210TII), 6 kW (MR-1210TIII)

• Pulse width: 80 ns/2160 Hz, 80 ns/1440 Hz, 250 ns/1440 Hz,

350 ns/1440 Hz, 900 ns/720 Hz, 900 ns/660 Hz*

*only MR-1210TIII

• Mixer and Local Oscillator: Microwave Integrated Circuit

• Transmitting Tube: Magnetron MAF1421B (MR-1210TII)

MAF1422B (MR-1210TIII)

• Modulator: FET switching

• Duplexer: Circulator

• Tuning system: Automatic/manual selectable

• Intermediate frequency: 60 MHz

• IF Band width: 10 MHz, 3 MHz

• Diameter of rotation/height: 1217/395 mm; 48/16 in

• Usable temperature range: –25˚C to +70˚C; –13˚F to 158˚F

• Relative Humidity: Less than 95% at 40˚C (+104˚F)

• Weight: Approximately 18 kg; 39.7 lb (without cable)

 6.5 feet model

• Type: 200 cm (6.5 ft.) Slotted Waveguide Array

• Rotation speed (typical): 22 rpm (MR-1210TIII only), 24 rpm, 36 rpm

• Beam width (typical: Horizontal beam 1.2˚