Icom MR-1210RII - Setting Zone Alarm Type

30
5
ALARM FUNCTION
Alarm sounds when the target
comes into the zone.
Alarm zone
Target (other ship, and so on)
■ Setting Zone alarm type
A zone alarm sounds when the target comes into the
zone, or when the target goes out of the zone. (p. 11)
q Push [MENU]/[ ], and then push [t] or [u] to
select the System menu.
w Push [p] or [q] to select the “Zone Alarm1” or “Zone
Alarm2” item.
e Push [ENTER]/[ ] to enter the option selection
mode.
r Push [p] or [q] to select IN or OUT.
• IN: Alarm sounds when the target comes into the
zone.
• OUT: Alarm sounds when the target goes out of the
zone.
t Push [ENTER]/[ ] to save the setting.
y Push [MENU]/[ ] to exit the Menu screen.
(MENU > System > Zone Alarm1)
(MENU > System > Zone Alarm2)