Icom MR-1210RII - Saving and Loading Settings

57
10
OTHER FUNCTIONS
■ Saving and loading settings
The MR-1210 can save three different settings for dif-
ferent operators or different situations, and immediate-
ly change from one to another.
The save or load settings are the settings of the items
in the Color, Trail, Display, Target, ATA, AIS, Video, and
System menus.
• “Save settings” and “Load settings” are selectable only in
the Standby mode.
D Saving settings
q Push [MENU]/[ ] to enter the Menu screen.
w Push [t] or [u] to select the Initial menu.
e Push [p] or [q] to select either the “Save Settings1,”
“Save Settings2,” or “Save Settings3” item.
• The setting item displayed in bold face has already been
saved.
r Push [ENTER]/[ ] to enter the option selection
mode.
• The confirmation “Sure?” is displayed.
t Push [ENTER]/[ ] to save the settings.
y Push [MENU]/[ ] to exit the Menu screen.
D Loading settings
After the setting is saved, you can recall it.
q Push [MENU]/[ ] to enter the Menu screen.
w Push [t] or [u] to select the Initial menu.
e Push [p] or [q] to select either the “Load Settings1,”
“Load Settings2,” or “Load Settings3” item that you
want to recall.
• The load item is grayed out when the settings have not
been saved.
r Push [ENTER]/[ ] to enter the option selection
mode.
• The confirmation “Sure?” is displayed.
t Push [ENTER]/[ ] to save the settings.
y Push [MENU]/[ ] to exit the Menu screen.
(MENU > Initial > Save Setting1, 2, or 3)
(MENU > Initial > Load Setting1, 2, or 3)