Icom MR-1210RII - Range Selection

56
10
OTHER FUNCTIONS
(MENU > Initial > Range)
■ Range selection
You can customize the selectable range.
q Push [MENU]/[ ] to enter the Menu screen.
w Push [t] or [u] to select the Initial menu.
e Push [p] or [q] to select the “Range” item.
r Push [ENTER]/[ ] to enter the option selection
mode.
t Push [p] or [q] to select the range that you want to
change the setting.
y Push [t] to set the range OFF, or push [u] to set
it ON.
u Repeat steps t and y until you complete the range
selection.
i Push [ENTER]/[ ] to save the setting.
• Do not push [CLEAR]/[ ] that exists the range selec-
tion screen without saving the settings.
o Push [MENU]/[ ] to exit the Menu screen.
Selectable ranges:
1
⁄8,
1
⁄4,
1
⁄2,
3
⁄4, 1, 1.5, 2, 3, 4, 6, 8,
12, 16, 24, 32, 36, 48*
1
, 64*
2
, 72*
2
(NM)
*
1
48 NM range is selectable in the MR-1210TII and the
MR-1210TIII.
*
2
64 and 72 NM ranges are selectable in only the
MR-1210TIII.
• Option selection mode